My CART

4" Polymer SPORT Channel

  • 4" Internal width - 8" height polymer concrete trench drain
  • Heavy duty load class 
  • Tongue and groove connection for channel to channel lock
  • 3" PVC or Corrugated pipe outlet end caps included
  • Perfect for tracks and sport facilities
  • Narrow slot openings for no footing issues , ever
  • Acid / Chemical resistant system
  • More product details below

 

 

$145.00
Free Shipping Over $299
FedEx 3-5 Days

Product details

Introduction our new SPORT System - designed for your athletic fields, tracks or any other area you need a large amount of water removed without causing any footing issues. Our 4 inch polymer concrete is a very dense and extremely durable heavy load rated channel. Each order comes with one closed and one open end cap with a 3 inch outlet. Bottom outlet with 4 inch PVC connection also available. This is a full polymer concrete system with narrow slot openings. 

PARAMETERS

Article ...................... 70953-1

Material ................... Polymer Concrete / Steel / Ductile Cast Iron

Dimensions ............. 39.4" L x 5" W x 8.0" H

Weight .................... 55 LBS

Load Class .............. C Class - 55,000 LBS

INCLUDED IN PACKAGE

- 4" Polymer Concrete Channel

- End Caps 

Specification Sheet

  CHANNEL SPECIFICATION PDF  

Installation

Trench Drain Installation

1. Prep your area -  prep your channel width and depth accordingly to the trench drain you purchased from us. You need a good amount of room (3-5 inches) to set your channel and pour or fill around it to have a nice level sound area with your finished project.

 

2. If pouring concrete, make sure the base (2-4 inches) is leveled out according to your site plan. Wait for the concrete to completely set before moving on.

 

3. Set your channels on the concrete pad, attach together and connect your pipe outlets according to your design. Pipe connections are designed for PVC and Drainage tile - if you wish to utilized a corrugated pipe, please use a rubber coupling with clamps. That makes for a snug fit. Seal all channels with clear silicone and make sure they are water tight and dry before your final concrete pour.

 

4. Standartpark recommends leaving your gratings in the channel when you are doing your final pour - this will alleviate any instances of your channels bending while the concrete sets. This is important so your gratings fit nice and snug after the concrete settles.

 

5. Pour and wait - Thats all!

NOTE - This package can also be used with our channel installation brackets for rebar installation (hanging installation). 

Q&A's

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Photos

Introduction our new SPORT System - designed for your athletic fields, tracks or any other area you need a large amount of water removed without causing any footing issues. Our 4 inch polymer concrete is a very dense and extremely durable heavy load rated channel. Each order comes with one closed and one open end cap with a 3 inch outlet. Bottom outlet with 4 inch PVC connection also available. This is a full polymer concrete system with narrow slot openings. 

PARAMETERS

Article ...................... 70953-1

Material ................... Polymer Concrete / Steel / Ductile Cast Iron

Dimensions ............. 39.4" L x 5" W x 8.0" H

Weight .................... 55 LBS

Load Class .............. C Class - 55,000 LBS

INCLUDED IN PACKAGE

- 4" Polymer Concrete Channel

- End Caps 

  CHANNEL SPECIFICATION PDF  

Trench Drain Installation

1. Prep your area -  prep your channel width and depth accordingly to the trench drain you purchased from us. You need a good amount of room (3-5 inches) to set your channel and pour or fill around it to have a nice level sound area with your finished project.

 

2. If pouring concrete, make sure the base (2-4 inches) is leveled out according to your site plan. Wait for the concrete to completely set before moving on.

 

3. Set your channels on the concrete pad, attach together and connect your pipe outlets according to your design. Pipe connections are designed for PVC and Drainage tile - if you wish to utilized a corrugated pipe, please use a rubber coupling with clamps. That makes for a snug fit. Seal all channels with clear silicone and make sure they are water tight and dry before your final concrete pour.

 

4. Standartpark recommends leaving your gratings in the channel when you are doing your final pour - this will alleviate any instances of your channels bending while the concrete sets. This is important so your gratings fit nice and snug after the concrete settles.

 

5. Pour and wait - Thats all!

NOTE - This package can also be used with our channel installation brackets for rebar installation (hanging installation). 

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question
Sale

Unavailable

Sold Out