My CART

12" MAXI Channel

  • 12" Internal - 15" External Trench drain system.
  • Galvanized reinforce rails with heavy duty cast iron gratings.
  • Tongue and groove connection to each channel to create longer run length. (product details below)
$435.00
Free Shipping Over $99
FedEx 3-5 Days

Our 12" Maxi channel is fitted with E Class bolted down ductile cast iron grates. Galvanized stamped steel side reinforcements. These are industrial level channels heavy enough for forklifts and extremely heavy loads. These are 12" internal width, and 15" deep. 3.3 ft in length. Tongue and groove connections for easy installation. 

SPEC SHEET

Parameters

Article .............................. PCM08700

Material ........................... PPE Plastic - Galvanized Steel - Ductile Cast Iron

Dimensions ..................... 39.4" L x 15" W x 15" H

Weight ............................ 105 LBS

Load Class ..................... E Class - 132,000 LBS

INCLUDED IN PACKAGE

- 12" Drive Channel

- End Caps (Per Order) - Additional end caps at checkout.  

  12" MAXI / DRIVE SPECIFICATION SHEET  

Parameters

Article .............................. PCM08700

Material ........................... PPE Plastic - Galvanized Steel - Ductile Cast Iron

Dimensions ..................... 39.4" L x 15" W x 15" H

Weight ............................ 105 LBS

Load Class ..................... E Class - 132,000 LBS

INCLUDED IN PACKAGE

- 12" Drive Channel

- End Caps 

Trench Drain Installation

1. Prep your area - Use our channel size recommendations on the previous page prep your channel width and depth accordingly to the trench drain you purchased from us. You need a good amount of room (3-5 inches) to set your channel and pour or fill around it to have a nice level sound area with your finished project.

 

2. If pouring concrete, make sure the base (2-4 inches) is leveled out according to your site plan. Wait for the concrete to completely set before moving on.

 

3. Set your channels on the concrete pad, attach together and connect your pipe outlets according to your design. Pipe connections are designed for PVC and Drainage tile - if you wish to utilized a corrugated pipe, please use a rubber coupling with clamps. That makes for a snug fit. Seal all channels with clear silicone and make sure they are water tight and dry before your final concrete pour.

 

4. Standartpark recommends leaving your gratings in the channel when you are doing your final pour - this will alleviate any instances of your channels bending while the concrete sets. This is important so your gratings fit nice and snug after the concrete settles.

 

5. Pour and wait - Thats all!

Questions & Answers

Ask a Question
  • what size are the knockouts on the end caps

    The end cap outlet knock outs are 8" and 12". Thank you

Sale

Unavailable

Sold Out